Forum: Third Generation Magna TE - TW

does anyone here have 17x7 rims with 235/45/17 tyres on them? how are they wearing?

Hi guys and gals... zap here with my first post... :D Firstly I wish to say that this is a great forum for Mitsi enthusiasts and have enjoyed reading the contents. Looking forward to maybe meeting some of you on a cruise or other club event. Mitsis are definately the best made and designed car on...

Hey guys/gals, Yesterday i had to do a rescue mission because one of my friends broke down... Now my friend being female told me over the phone that it overheats all the time and wont run when it happens... I get to the scene, overflow bottle at normal level, engine temp at normal level, i...

Can anyone advise me of a good Tool to remove a MAGNA oil filter Rather than hammering a screwdriver into it to turn it off ? the dam thing is just to small for most tools and there is a lack of space around it as most of you probaly already know. Does Mitsu sell something designed for it? Any...

Hey, I recently had a near new gearbox fitted to my car. After the gearbox was installed the car wouldn't start, it was taken down to an auto electrician to have fixed. They couldn't find anything wrong after checking everything electrical. They then moved the gearstick up and down through the...

hey people couple of weeks ago my ride got hit and bent my rear bar. The work shop said they replaced the bumber but when doing a fine detail on my car i found i had 2 melt marks form my old muffler wat can i do bout this the work shop is denying all this of course.

Over the last few weeks our Verada has being running differently. The car now considerably shakes for a second as the engine is turned off. When the car is idling it also shakes inconstantly. It seems as though it shakes and stops shaking ever 1/2 a second to one second. It is a KJ Verada...

Well I finally get around to putting those Reverse Glow Gauges in today. Well not only were they dirty, plain hard to clean, I got two of one display, and none of another. And to top it all off, I couldn't get them to work. (Before anyone says anything, this is the first time I removed them from...

Well, as the title suggests - I managed to round off one of my wheel nuts on Saturday morning while attempting to swap the wheels over on my two TJ's (I ****ing hate tyre places that use rattle guns :rant: ). I managed to get two places to take a look at it on the day - both of them tried, to no...

Hey, I bought some new Vision Plus globes today for my TJ and just tried fitting them. I got the connector and rubber seal off alright, but was getting really impatient with the spring holding the bulb in, so got a screw driver and tried to lever it out (:rant: I'm so pissed off at myself right...

Hey guys, Just wondering a few things in regards to interior, i plan on getting some black verada leather seats in the not to distant future, i would like to know: Did any 3rd gen come out with black carpet stock? What about a black parcel shelf cover?

Hi guys i just got my Greddy emanage and am going to install it myself but just hit my first hiccup (mechanical not electrical),I removed carpet in footwell and removed metal cover from side of center console but how do you remove ECU to get to wiring? :redface: :nuts: BTW have done a search...

Opinions needed. Bringing the car in to fix minor paint scratches etc and possibly get the wing removed in a couple of days. Still not sure whether to get rid of the wing or leave the subtle wing on. Not sure what it will look like from all angles without the wing. Will it be too bare without the...

Ok, this isnt for a magna... but i thought i'd ask anyway.. need all the help i can get. The rear right brake caliper in the silvia (ps13) is flexing/deflecting, causing a spongy pedal & weak handbrake (caliper attached H-brake, not drum). Does anybody know what would cause such a thing? I...

Just a couple of pics... Any questions?

Hi guys, just a quick question? Where I can buy letter-box grill and how to powder coat it into black? Went to auto-burn and super cheap auto, they don't sell letter-box grill. Thanks hips...

Hi all... Just wondering if anyone can help with referring me to a decent workshop manual. Which one do you guys sware by - Gregorys??? Haynes??? Other??? I want to work on my car myself to save a few bucks, I am confident in my abilities but would prefer a bit of backup (just in case!). ...

Hello people, I would like to know how you would go about changing the oxygen sensor on our 3rd gen? Where is it located and is it a DIY?? Thanks!

hey all newbie here ive noticed of late that my 4 cylinder 5 speed has been leaking fluid but had no idea on what it was but i jacked the car up this arvo and found some screws missing, having just got a new clutch put in maybe he missed something when putting it back together anyone can help me...