Stock BT install (Parrot)
https://www.aussiemagna.com/forums/sh...27&postcount=7
Printable View
Stock BT install (Parrot)
https://www.aussiemagna.com/forums/sh...27&postcount=7
PAC SWI PS Steering Wheel Controls Made Easy
https://www.aussiemagna.com/forums/sh...81&postcount=1
Removing the instrument cluster to disable CEL
https://www.aussiemagna.com/forums/sh...5&postcount=50
Hard to find is this part number for the 380GT
About a 120 bucks plus 15 clips.
-the carpet (trim) part number MN177073HA black.
-the clips part number MB189333 15 required
-the clips part number MB648995 4 required
Minimum Battery requirements.
460 CCA. From Exide Battery Help Line.
470 CCA. From Battery World.
Suitable Optima Red Top battery Discussion
Mitsubishi recommends HD or Extra HD Batteries for a 380. Greater than 550CCA ( they actually recommended a 560 CCA) so thats what I have, 2.5 years and no probs...
As a tip, if you can get one with a Good reserve i.e. over 90 mins, it should get you back to town in case of alternator/charging failure.
Mitsubishi actually recommend to me a 560+ over the phone, but other members insist on a 600....
.................................
380 Headlight Remove / Removal Globe Replacement H4 and H7
https://www.aussiemagna.com/forums/sh...t=86837&page=1
The 380 ECU exposed.
To pull apart, do it the easy way, the silastic seal holding the PCB in can be defeated by prising with a flat blade screwdriver pressed on the OBD connector and the alloy casing.
It uses a 4 megabit flash chip, part number Am29F400bb-70SE.
https://img375.imageshack.us/img375/144/ecu1.jpg
https://img529.imageshack.us/img529/8703/ecu2.jpg
https://img72.imageshack.us/img72/2935/ecu3.jpg
https://img823.imageshack.us/img823/9666/ecu4.jpg
I have 10 megabit photos showing more detail for those who want to have a crack.
.
Here is a complete look at the entire 380 power plant showing engine, steering,brakes,suspension and loom.
https://www.youtube.com/watch?v=EZloL..._order&list=UL
Head light adjustment including diagram on where adjustment screws are. ***Kudos to Foozer for this one***
https://www.aussiemagna.com/forums/sh...t=85670&page=2
380 Boot lid trimQuote:
Originally Posted by Blackstar
The above is incorrect. Part requirements as follows -
1 x MN177073HA (Trim)
11 x MN189333 (Clips)
If you haven't already got the handle in the boot you will need this also. I did being a VRX :) ..... Approx $147 all up.
Disciple said..
Quote:
https://www.aussiemagna.com/forums/im...cons/icon1.gif Informative 380 site.
Hey guys,
Just found this site, hopefully it hasn't been posted before. It's got a shedload of information on the 380 - more than I've seen anywhere before.
https://www.autoweb.com.au/cms/A_1052...wsarticle.html
If there's someone who has the know how, can we save that site to someones computer in case it goes down? I'm happy to save it to my PC if someone wants to show me how.