+ Reply to Thread
Results 1 to 10 of 65

Thread: Third Gen Common faults thread

Hybrid View

  1. #1

    Join Date
    Apr 2012
    Location
    Victoria
    Posts
    16

    Default

    The centre console around auto trans, easy to pop out. After fixing my hand brake lever, it is hard to put it back into place and now it's popped out. Will fix that on weekends.

    Also the handbrake did not work properly last time(wont lock even on full strength on hand brake lever). In the end change brake disc and will do the pads on weekends.

    Knocking yes it's still there even though already changing oil. Is there any additives that can reduce this?

    Thanks

  2. #2

    Join Date
    Feb 2012
    Location
    Victoria
    Posts
    138

    Default

    Quote Originally Posted by vp920b View Post
    The centre console around auto trans, easy to pop out. After fixing my hand brake lever, it is hard to put it back into place and now it's popped out. Will fix that on weekends.

    Also the handbrake did not work properly last time(wont lock even on full strength on hand brake lever). In the end change brake disc and will do the pads on weekends.

    Knocking yes it's still there even though already changing oil. Is there any additives that can reduce this?

    Thanks
    Hey mate, I followed Mal's advice following a ticking noise in my wifes TJ2.

    1. Added Wynns 'Engine Flush', let idle (idle ONLY) for 20-25 mins.
    2. Drain oil.
    3. Fill up again using Penrite HPR10.
    4. Added Wynn's 'Supreme' engine treatment.

    2-3 days later, no more ticking noise, especially on cold morning start up, HAPPY camper

  3. #3

    Join Date
    Apr 2012
    Location
    Victoria
    Posts
    16

    Default

    Thanks mate. I'll try to put wynn's engine treatment then.. Just changed my oil 200KM's ago.
    Last edited by vp920b; 03-05-2012 at 03:53 PM.

  4. #4

    Join Date
    Feb 2012
    Location
    Victoria
    Posts
    138

    Default

    Hi mate,

    Don't quote me but I think the engine treatment has nothing to do with eliminating the noise.

    It's the engine flush that is more beneficial for that, don't really think adding the treatment now would help at all ( with the noise ). Best to wait until next change and try the flush

  5. #5

    Join Date
    Sep 2012
    Location
    South Australia
    Posts
    1

    Default

    Hi hoping i can get some help. When I start my Auto TR 1993 Magna, I cant drive it till its warmed up otherwise it stalls and is blowing smoke. When im driving my car surges and when im doing about 100ks and I accelerate the car shudders till i get to about 115kms, Is this the o2 sensor or something else? Cheers in advance

  6. #6
    TH SPORTS MAGNA revhead072010's Avatar
    Join Date
    Jul 2012
    Location
    South Australia
    Posts
    131

    Default

    Quote Originally Posted by Vorik View Post
    Hi hoping i can get some help. When I start my Auto TR 1993 Magna, I cant drive it till its warmed up otherwise it stalls and is blowing smoke. When im driving my car surges and when im doing about 100ks and I accelerate the car shudders till i get to about 115kms, Is this the o2 sensor or something else? Cheers in advance
    what colour is the smoke?
    CHECK OUT MY RIDE HERE TH SPORTS MAGNA

    MY RIDE

  7. #7

    Default

    Is there is anything to worry? Is the dealer help me out in the up to date all these things? The few fault you described i was also facing them.Is the company doing any thing to remove the faults

  8. #8
    Luushen's Avatar
    Join Date
    Oct 2012
    Location
    Victoria
    Posts
    193

    Default

    thanks for this thread it has helped me out big time

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts