+ Reply to Thread
Results 1 to 10 of 73

Thread: unstable idlling-stalling im going nuts

Hybrid View

  1. #1
    ...
    Join Date
    Aug 2014
    Location
    New South Wales
    Posts
    963

    Default

    Quote Originally Posted by GRH View Post
    upping this old thread as i noticed i didn't write the fix.

    issue was the TPS sensor.. installed a new one and most of the issue went away..
    a second problem contributing to this idling issue aparently was bad contacts in the MAF sensor.. that also occasionally caused weird idling with rpm going up and down trying to stabilise. back then maf wasn't acting up that bad.. later it began throwing engine check light. so it could be an early sign..
    What procedure have you used to adjust the new TPS?

    Or did you just install the new one using an approximate setting by eye?
    ...

  2. #2
    GRH's Avatar
    Join Date
    Mar 2013
    Location
    Queensland
    Posts
    166

    Default

    if i recall correctly i used a multimeter to measure continuity and twisted the tps sensor to a point where it wasn't beeping but began with a slight pull of the throttle cable (or might be the other way around beeping and find the stopping point)

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts