380 owners from DB 2005 - DB SIII 2008 Discussion here.
<slinks quietly back in to the forum> :ninja: Hi All, Just had my 75K service done and a Trans and Engine Oil flush. Have noticed a definite drop in performance, nothing tragic, but the pantsometer reckons I'm missing a quite a few KW across the range and a fair bit of agility. I'm pretty...
hey there everyone. I have been looking on prominent suspension sites like whiteline and nolathane and there is little or no components to suit 380 (also searched galant). Does anyone make aftermarket suspension components for these. noticed that the list for prancers is about a page long...
Hi There, First of all let me say that this is my first post and I have to say that I am stoked with all the info available for the 380 and the following on this Forum. I have to admit I really am a Nissan man but my daily driver has just become a manual 380 which in my opinion is one of the most...
I have the full technical manual for the Endeavour, Galant and Outlanders. Pm me if you want a download link. here is the point of interest for us Aussies...the rear axle layout... https://img801.imageshack.us/img801/6786/endeavorrearaxle.jpg ...
Hi all I just bought a 380 Series II Platinum and am still learning about the car. I have been trying to get the ski port open but am not having any luck. The seat section folds down okay, but the plastic bit behind it actually separating the cabin from the boot doesn't want to move either way....
OK I am interested in everyones opinion on this. Do you think this is do able? KIF says he did it whilst going from Syd to Albury and return whilst on red P's doing 90 kph and on cruise.
What can be done with a billet of aluminium? Beautiful workmanship right here in Geelong. https://img810.imageshack.us/img810/1350/3pulleysforsprintex.jpg Fitted the 65mm pulley today...12 psi. .
Hey, with this mod, are there any hot air issues if one were to simply remove it altogether? Or is cutting the end off and reattaching it better?
Im not sure if Im in the right section but here goes, have recently installed a pioneer GM-6400F 4 channel amp, TS-d1602R 6.5 front speakers, TS-D6902R 6x9 rear speakers & 2x convertors to use the existing headeck. Anyhow the problem Im getting is low frequency noise coming from my headeck...
Like on the VRX/LX/SX/GT. Anyone know if this can be done? Anyone actually done it? Parts needed? Cost?
Which is better & are there any issues with the pod setup eg cel probs. Are there any benefits in installing either of those setups before installing extractors?
hey guys About 3 weeks ago my car was on the way to get its re spray when the check engine light came on right after we drove through alot of dust caused by a tractor mowing dirt at a race course causing the dust to come over the road, i didnt think much of it as i kinda thought it was my...
Hi just letting everyone know i just picked up a factory 380 bluetooth kit from Eddy wreckers today, which is actually a Parrot CK3000. It cost me $65 and is a plug and play kit that took me 15 mins to install. No soldering or cutting wires whatsoever. Works a treat with my iphone 4!
Engine moving when selecting gears... Is this normal? I haven't seen another car do it, but its not often you look at your engine when you select drive or reverse when your bonnet is up and your head is under there... The way my 08 380 VRX does this it looks like it is supposed to do...
OK, with Greg's help (ie: he did the work, I took photos, swore at cable ties and drank coffee) my bluetooth kit has been installed. Here's a DIY with photos for you to try at home, also helps with anyone who wants to pull the dash apart, as it really IS very easy on the 380's, much easier than...
THATS IT.....IV HAD F:censored::censored::censored:ING ENOUGH!! Our old girl has pulled her last and final straw. As some of you may already know we have had continuing electrical issues with our 380 since the day we brought it. Last weekend was the final time. We were in Echuca, Victoria,...
Alright so I've only driven for 2-3years now, so excuse my newbness.. I was driving today, around 60k's when a guy in front of me hit his brakes when it turned yellow.. he could've easily passed but nope, which made me hit mine too. The problem im going to bring up is when I hit it, it felt like...
Hi there, recently purchased a series 2 platinum.. Berklee muffler is going on today and the intake is on a plane from the US as we speak. After they are done I want to look at acquiring a VR-X spoiler. Anyone know where I can find one and roughly how much it would cost to paint patch it to the...
Anyone having boot carpet issues? I'm wondering whether it's going to be covered by warranty. I have a series 3 sports and have noticed the mainly black carpet in the boot is starting to ball quite badly. It makes the colour look strange, then when you look closer the cause is balls of the...
Hi all, As I mentioned in the broken window thread, my driver side window recently seized up and had to be fixed. I only just noticed, on the weekend, that when they put the trim back in place, there is a section of trim about 2 inches long that is not fully clipped into place - about where the...
There are currently 8 users browsing this forum. (0 members & 8 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules