Setting up a wireless reversing camera for the wife's ZG MY08 Outlander XLS. The camera is part of a number plate frame and fitted it on the weekend. It was a pain taking off the upper, side and main tailgate trims. No holes drilled, just a bit of plastic on the passenger side number plate light bulb holder was cut to feed the cable through. Powered off the passenger side reverse light and the transmitter sits there as well.


Just received the 7" monitor to fit in the upper dash storage bin with the lid permanently popped open (pretty much like the 380 type) and will fabricate some plastic shrouds to block off the gaps.


The pre-wiring for the monitor was also done on the weekend and was fairly easy to do. The reverse light fuse was behind the glovebox and will be used to trigger the relay. There is an empty fuse (with acc power) which I will use to power the monitor. All up, a single power cable goes up the left of the audio unit to the storage box.


Will take some photos and post up here once it is all done and dusted.


Stay tuned.