+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: #5 flashing on centre display after battery was removed and replaced.

  1. #1

    Join Date
    Mar 2009
    Location
    South Australia
    Posts
    7

    Default #5 flashing on centre display after battery was removed and replaced.

    Regarding my TJ Advance 2 wheel drive wagon...
    After replacing the battery yesterday, I saw this #5 flashing away on the little centre display and pressed the mode / speed alarm, up and down buttons and it changed from flashing#5 , to 3.5 and then dissapeared. Was I surposed to set it to my cars specifications ? Like "wagon" "2 wheel drive" etc, or will just the 3.5 be okay alone as the only setting and to leave the rest as is ? If I need to change it to 2wheel drive and to wagon, how do I get the screen back up to make these adjustments and how do I actually make the adjustments ?
    Whitey

  2. #2
    Yes, its a Mitsi! vlad's Avatar
    Join Date
    Jun 2003
    Location
    South Australia
    Posts
    4,764

    Default

    These settings are mainly to work out fuel consumption etc. 5/S stands for sedan and LJ stands for wagon. 3.5 and 3.0 represents the capacity of the engine.

    To change a value, press the mode button for less than 2 seconds. Pressing for more than 2 seconds locks in the setting and beeps.
    The set code can be checked by holding the mode button and turning the key to ACC.

    As for resetting, you can either lift the IOD connector for 5 seconds with the ignition in lock position or just disconnect the batter -ve for 5 seconds.

  3. #3

    Join Date
    Mar 2009
    Location
    South Australia
    Posts
    7

    Default

    Okay. Thanks for that. I just checked and it reads 3.5 which my car is. So it will be fine to leave it like that and the car will run fine ?
    I was under the impression that these settings determined the correct fuel map for the 3 or 3.5 litre ? So your saying this setting is meerly for fuel economy readings on that little centre display and has nothing at all to do with fuel mixtures between the 2 different capacity engines ? Thankyou for your information.

  4. #4
    Nothing Beats Boost. KING EGO's Avatar
    Join Date
    Oct 2004
    Location
    New South Wales
    Posts
    2

    Default

    Just hold down the mode button and it will display 3.5. hold it down again and screen will go back to normal.
    Lag Was Only Invented To Give V8s Some Hope

    377kw of Turbo Charged Street Tuned Power
    Click Here To See Sexiest & Most Powerful Magna
    2011 AMC Car Of The Year
    1:17 Wakefield Park

    Click Here To Visit www.4MYEGO.org

  5. #5
    Yes, its a Mitsi! vlad's Avatar
    Join Date
    Jun 2003
    Location
    South Australia
    Posts
    4,764

    Default

    Quote Originally Posted by WHITEY View Post
    Okay. Thanks for that. I just checked and it reads 3.5 which my car is. So it will be fine to leave it like that and the car will run fine ?
    I was under the impression that these settings determined the correct fuel map for the 3 or 3.5 litre ? So your saying this setting is meerly for fuel economy readings on that little centre display and has nothing at all to do with fuel mixtures between the 2 different capacity engines ? Thankyou for your information.
    You have a wagon with a different sized tank than a sedan so selecting sedan may give wrong distance to empty reading etc.

  6. #6

    Join Date
    Feb 2010
    Location
    New South Wales
    Posts
    216

    Default

    Hi all , i am having a bit of trouble resetting mine , when i press the mode switch i only get a "w" or similar come up. i dont have the owners manual , is there a step by step way of doing this programming , for a TJ 3.0 auto. thanks

  7. #7
    Yes, its a Mitsi! vlad's Avatar
    Join Date
    Jun 2003
    Location
    South Australia
    Posts
    4,764

    Default

    Quote Originally Posted by magwheels View Post
    Hi all , i am having a bit of trouble resetting mine , when i press the mode switch i only get a "w" or similar come up. i dont have the owners manual , is there a step by step way of doing this programming , for a TJ 3.0 auto. thanks
    I think you mean TH 3 litre Look at my first post for instructions. Basically, do not use the up/down arrow buttons. Only use the mode button. Pressing the mode button (for less than 2 seconds) will first swap between S and W. So, if you have a sedan then press the mode button until the S (which looks like a 5 appears) and then press and hold the mode button (more than 2 seconds) until it beeps. It will now show the capacity, which will change between 3.0 and 3.5. Again, pressing the mode buttons swaps between them and pressing and holding the mode button will lock in the selected one and beeps.

  8. #8

    Join Date
    Feb 2010
    Location
    New South Wales
    Posts
    216

    Default

    thanks Vlad , i thought mine was TJ , i'll recheck the compliance plate. so there are only 2 settings , Sedan or Wagon and 3.0 or 3.5? should be easy then.

  9. #9
    Yes, its a Mitsi! vlad's Avatar
    Join Date
    Jun 2003
    Location
    South Australia
    Posts
    4,764

    Default

    Quote Originally Posted by magwheels View Post
    thanks Vlad , i thought mine was TJ , i'll recheck the compliance plate. so there are only 2 settings , Sedan or Wagon and 3.0 or 3.5? should be easy then.
    Well I don't think TJs came in 3.0. You also state you have a TH in your profile. Does it have a beaked bonnet separating the grill?
    The AWDs have different settings.

  10. #10

    Join Date
    Feb 2010
    Location
    New South Wales
    Posts
    216

    Default

    Hi , no beak in bonnet so must be TH . i know its a 2000 model but will recheck. i'm not 100% familar with Magnas as yet , our other family car is a 1994 Delica , V6 3.0 engine , 4wd 7 seat import.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts