HID Conversion on TJ Verada

[Red Valdez]

Its a shame you are not in Vic Pocko or i could show you just how good they are. I could also show you they have a defined line where the beam stops therefore they are not spread everywhere.

I would beg to differ.

Projector retrofit with 5000k bulbs on the left, and 6000k bulbs in standard reflectors on the right:

[rush]

Just to support what Red Valdez said. I had 6000k HIDS fitted to my parabolics. Yes light was good, but too much scatter

Fitted HID QUAD projectors. Much better and much more legal.

Before Cutoff line
Poor Picture but was the best i had


After Cutoff line





Few other pictures

[shezza]

I have heard good about Morimoto Mini Projectors. They are reasonably priced, good quality kits and fairly easy to install. Though the better performing ones are harder to install.
HIDs will always blind someone. Legal set up or not. We have all been hit in the eye by OEM HID set ups, so imagine without the auto-levelling. Though the fact is, most set ups are "whack it straight in" types... So if you install projectors with a cut off, you virtually deserve a medal! Good luck